spec no: dsaa5579 rev no: v.5 date: nov/11/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.l.li package dimension s description the super bright red source color devices are made with gallium aluminum arsenide red light emitting diode. p/n: kpc - 3216src - prv super bright red 3.2x1.6mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches) . 2. tolerance is 0 .2(0.0079") unless otherwise noted . 3.specifications are subject to change without notice . features 3.2x1.6mm smt led, 1.1mm thickness. low power consumption. w ide view ing angle. ideal for backlight and indicator. various colors and lens types available. package: 2000pcs / reel . rohs compliant.
spec no: dsaa5579 rev no: v.5 date: nov/11/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.l.li selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kpc - 3216src - prv super bright red (gaalas) water clear 36 80 120 symbol parameter device typ. max. test conditions units peak peak wavelength super bright red 660 nm i f =20ma d dominant wavelength super bright red 640 nm i f =20ma ? 1/2 spectral line half - width super bright red 20 nm i f =20ma c capacitance super bright red 45 pf v f =0v;f=1mhz v f forward voltage super bright red 1.85 2.5 v i f =20ma i r reverse current super bright red 10 ua v r = 5v parameter super bright red units power dissipation 100 mw dc forward current 30 ma peak forward current [1] 155 ma reverse voltage 5 v operating / storage temperature - 40c to +85c
spec no: dsaa5579 rev no: v.5 date: nov/11/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.l.li super bright red kpc - 3216src - prv
spec no: dsaa5579 rev no: v.5 date: nov/11/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.l.li recommended soldering pattern (units : mm ) tape specifications (units : mm ) kpc - 3216src - prv remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity / luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
